Card Print Sheet
Repeat cards on a page with duplex back alignment.
Settings saved on this device.
Images never leave this device. Shared links carry settings only — the recipient uploads the images again.
Printing TCG proxies or badges? Print one test page on plain paper and hold it against the light to check the back alignment before the final run.
Uses your browser print dialog. Choose “Save as PDF” to export.
Set margins to None, scale to 100% and enable background graphics for exact sizes.
Repeated cards, perfectly aligned
- Upload the front image and, if needed, a different back image.
- Pick the paper size, the card size and how many copies — or fill the whole page.
- Adjust gap, border and cut guides, match the duplex flip to your printer, then print or save as PDF.
Good to know
Will the back align with the front?
Pick the same duplex flip your printer uses (long edge for most printers) and print one test page first. Use the fine-tune X/Y fields to correct any small shift.
What card sizes are supported?
Poker (63 × 88 mm), Bridge (57 × 89 mm), business card (89 × 51 mm) and badge (85.6 × 54 mm) presets, plus fully custom sizes between 20 and 120 mm.
Are my images uploaded anywhere?
No. Images stay in your browser memory and are never stored or shared. Shared links carry the settings only.
How do I export a PDF?
Click Print and choose “Save as PDF” in the dialog, with margins set to None and scale at 100% so cards keep their real size.